Dremel Rotary Power Tool Bits and AccessoriesCutters, Grinding Stones, Engraving bits, Cutoff Wheels and More |
  1 | | 3 | 4 | 5   |
') "Structured Tooth Tungsten Carbide Cutter (Cylinder) - Click to see a larger image") |
') "Structured Tooth Tungsten Carbide Cutter (Taper) - Click to see a larger image") |
 "Tungsten Carbide Cutter - Click to see a larger image") |
 "Tungsten Carbide Cutter - Click to see a larger image") |
Structured Tooth Tungsten Carbide Cutter (Cylinder)A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting, sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. Bit Diameter Inch 1/4″. Shank Diameter 1/8″. DRE9933 - $16.20 | Structured Tooth Tungsten Carbide Cutter (Taper)A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting, sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. Bit Diameter Inch 1/4″. Shank Diameter 1/8″. DRE9931 - $16.20 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″. DRE9901 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 3/32″. Shank Diameter 1/8″. DRE9902 - $12.00 |
 "Tungsten Carbide Cutter - Click to see a larger image") |
 "Tungsten Carbide Cutter - Click to see a larger image") |
 "Tungsten Carbide Cutter - Click to see a larger image") |
 "Tungsten Carbide Cutter - Click to see a larger image") |
Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″. DRE9903 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 3/32″. Shank Diameter 1/8″. DRE9904 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″. DRE9905 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″, DRE9906 - $12.00 |
 "Tungsten Carbide Cutter - Click to see a larger image") |
|
 "Tungsten Carbide Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″, DRE9909 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″. DRE9910 - $12.00 | Tungsten Carbide CutterA high-speed cutter made of tungsten carbide, the hardest material next to diamonds. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Bit Diameter Inch 1/8″. Shank Diameter 1/8″. DRE9911 - $12.00 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/32″. Shank Diameter 3/32″. DRE105 - $3.25 |
 "Engraving Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/16″. Shank Diameter 3/32″. DRE106 - $3.25 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 3/32″. Shank Diameter 3/32″. DRE107 - $3.25 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/32″. Shank Diameter 3/32″. DRE108 - $3.25 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/16″. Shank Diameter 3/32″. DRE109 - $3.25 |
 "Engraving Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
 "Engraving Cutter - Click to see a larger image") |
 "Aluminum Oxide Abrasive Wheel - Click to see a larger image") |
Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 5/64″. Shank Diameter 3/32″. DRE110 - $3.25 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/32″. Shank Diameter 3/32″. DRE111 - $3.25 | Engraving CutterQuality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Bit Diameter Inch 1/16″. Shank Diameter 3/32″. DRE113 - $3.25 | Aluminum Oxide Abrasive WheelA high-quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Works best for cleaning and rust removal, as well as light polishing. Bit Diameter Inch 1″. Shank Diameter 1/8″. DRE500 - $6.75 |
 "Aluminum Oxide Grind Stone 3/16 - Click to see a larger image") |
 "Aluminum Oxide Grinding Stone - Click to see a larger image") |
 "Aluminum Oxide Grinding Stone - Click to see a larger image") |
 "Aluminum Oxide Grinding Stone - Click to see a larger image") |
Aluminum Oxide Grind Stone 3/16A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces. Bit Diameter Inch 3/16″. Shank Diameter 1/8″. DRE945 - $3.25 | Aluminum Oxide Grinding StoneA high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces. Bit Diameter Inch 3/8″. Shank Diameter 1/8″. DRE932 - $3.25 | Aluminum Oxide Grinding StoneA high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces. Bit Diameter Inch 1/4″. Shank Diameter 1/8″. DRE952 - $3.25 | Aluminum Oxide Grinding StoneA high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces. Bit Diameter Inch 1/4″. Shank Diameter 1/8″. DRE953 - $3.25 |
| 1 | | 3 | 4 | 5 |
