Wood Model Ship Kits

Glue and finishing materials are not included with some kits. We recommend cyanoacrylate glue and an Xacto modeler's knife.


Baltimore Clipper Bounty Santa Maria

Baltimore Clipper

Easy to build and designed for ages 10 and up. Two masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.
Length: 11.5 in (29 cm)
Height: 9 in (23 cm)
Width: 3.3 in (8.5 cm)


Glue and paint required (not included)

CNSB4122 - $43.95


Bounty

Easy to build and designed for ages 10 and up. Three masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.
Length: 10 in (25.5cm)
Height: 9.25 in (23.5cm)
Width: 3.2 in (8cm)
Glue and paint required (not included)

CNSB4121 - $43.95


Santa Maria

Easy to build and designed for ages 10 and up.Three masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.
Length: 9.5 in (24 cm)
Height: 8.25 in (21cm)
Width: 4 in (10cm)
Glue and paint required (not included)

CNSB4120 - $43.95



Viking Ship Chinese Junk Gondola Kit

Viking Ship

Easy to build and designed for ages 10 and up. Single masted sailing ship with paper sails. Pre-formed wood hull. All wood construction. Includes everything needed to build the kit: Preformed wood hull, paper sails, paint, paint brush, glue, oars, decal placement sheet, instructions for cutting out and recognizing pieces.
Length: 9.6 in (24.5 cm)
Height: 6 in (15cm)
Width: 5.5 in (14cm)
Glue and paint required (not included)

CNSB4116 - $43.95


Chinese Junk

Our Junior Modeler Collection boats are designed to be easy to build while still offering up the charming details that Dumas is famous for.

The Chinese Junk kit includes the following parts:

*Vacuum formed hull and deck
*Laser cut wood parts
*Paper sails
*Step-by-step instructions
*Stand
Glue and paint required (not included)

DUM1010 - $24.95


Gondola Kit

Our Junior Modeler Collection boats are designed to be easy to build while still offering up the charming details that Dumas is famous for.

The Chinese Junk kit includes the following parts:

*Vacuum formed hull and deck
*Laser cut wood parts
*Paper sails
*Step-by-step instructions
*Stand
Glue and paint required (not included)

DUM1012 - $24.95



Noahs Ark Viking Ship Kit Cheasapeake 17 Kayak Kit

Noahs Ark

Wood model kit by Dumas
Features:

  • Laser-cut wood parts
  • Panel-on-frame construction
  • Display Stand
  • Die-cut PVC parts
  • Figures shown are not included
Minimum Age: 12. Length: 34". Beam: 8". Glue and paint required (not included).

DUM1262 - $125.00

On Sale!$109.99


Viking Ship Kit

Our Junior Modeler Collection boats are designed to be easy to build while still offering up the charming details that Dumas is famous for.

The Chinese Junk kit includes the following parts:

*Vacuum formed hull and deck
*Laser cut wood parts
*Paper sails
*Step-by-step instructions
*Stand
Glue and paint required (not included)

DUM1011 - $24.95


Cheasapeake 17 Kayak Kit

Designed for persons with no prior building experience.
Indigenous Arctic cultures relied upon their sealskin covered kayaks for hunting and traveling in cold, dangerous waters.
FEATURES: All wood model consists of Lite-Ply, Basswood, and Birch plywood construction. Laser cut frames and cockpit coaming. Pre-shaped bow and stern blocks. Photo-etched brass buckles. Ribbon and elastic thread for hatch straps, bungies and felt for seat cushions.
INCLUDES: One Midwest Chesapeake 17 Wooden Sea Kayak Static Model Kit with, rolled plan sheet, instruction manual, all fittings, dowels, wood and fasteners.
REQUIRES: Building tools, paint, white glue, CA glue,
SPECS: Length: 17" (430mm) Beam: 2" (51mm) Height: 1-3/16" (30mm) Scale: 1"=1' (1:12)

MIDB0989 - $48.99



Indian Girl Canoe Kit Peterborough Canoe Kit Modeller's Tap Hammer

Indian Girl Canoe Kit

Designed for the Intermediate to Advanced Modeler.
Designed by J. H. Rushton, America's premier canoe builder. Shown painted black on the outside and natural wood along the top edge and on the inside of canoe.
FEATURES: Midwest Micro-Cut Quality basswood, cherry and mahogany parts. Cleanly pre-cut parts, including forms, strongback, stems, decks and Ribs. Flexible basswood planking strips. Fabric seats and brass stem band. Full-sized rolled plan. Illustrated step-by-step construction manual.
INCLUDES: Strongback. Cherry seats, inwales, gunwales. Fifty planks. Two cherry thwarts. Brass stem band. Seat fabric. Plan sheet. 16-Page constructon manual.
REQUIRES: Instant (thin CA) and slow setting (thick CA-). CA accelerator. Water-based white glue (Optional adhesive instead of Cyanoacrylates). Paints. Sanding blocks and sandpaper. 18" steel straight edge. Small square. Straight pins. Razor saw.
SPECS: Length Overall: 16" (406mm). Beam: 2-3/4" (70mm). Height: 2" (51mm). Scale: 1"=1' (1:12).

MIDB1981 - $39.99


Peterborough Canoe Kit

Designed for Intermediate to Advanced Modelers.
There was a time in the late 19th and early 20th centuries when "a PETERBORO" meant almost any wooden canoe in the traditional Canadian style, that is, one basically having the appearance of the woodland bark canoe of the North American Indian. Canoe is pictured with a smooth natural wood color and brown to dark brown stipes that run the full length of the canoe.
FEATURES: Micro-Cut Quality basswood, cherry and mahogany parts. Cleanly pre-cut parts, including forms, strongback, stems, decks and ribs. Flexible basswood planking strips. Fabric seats and brass stem band. Full-sized rolled plan. Illustrated step-by-step construction manual that assures success.
INCLUDES: Gunwales. Deck cap set. Strongback. Cherry floor blanks. Mahogany planks. Plank set. Rib set. Plans sheet. 16-page instruction manual.
REQUIRES: Instant (thin CA) and slow setting (thick CA-) glues. CA Accelerator. Water-based white glue (Optional adhesive instead of Cyanoacrylates). Paints. Sanding blocks and sandpaper. 18" steel straight edge. Small square. Straight pins. Razor saw.
SPECS: Length Overall: 15-7/8" (403mm). Beam: 2-5/8" (67mm). Height: 1-1/2" (38mm). Scale: 1"=1' (1:12).

MIDB1982 - $44.99


Modeller's Tap Hammer

To be honest, there's nothing special about this hammer other than its small size. If you already have a small hammer, there's no reason to buy this one, but for those of you who need a nice hammer for your modelmaker's tool box, here it is.

LATR7520 - $7.50



Nail Nailer Plank Bender Hull Planking Vise

Nail Nailer

The Nail Nailer is designed to be used with the Latina wood stage coach and ship model kits. It is very easy to use, and helps to avoid damaging delicate surfaces. Just insert the nail into the nailer and push it slightly where you want it to go.

LATR7650 - $18.50


Plank Bender

The Plank Bender is designed to score the inside of a wooden plank to allow bending it to fit the farmework of a wood model.

LATR7550 - $11.99


Hull Planking Vise

Top quality beechwood vise works as a ship model maker's third hand. Allows you to work on the model with both hands free and with the model in any position desired.

LATR7010 - $24.99




Frequently Asked Questions
Privacy Policy
Contact Us